Fan-shaped engine storage. During the heyday of steam locomotives, the main stations had an engine zone attached to them, and there was always a turntable.

Steam locomotives whose traveling direction is limited due to their structure are placed on a turntable and turned around in order to change the traveling direction at the station or terminal station, and they are equipped with coal, sand, etc.

The good old days, the electric turntables are perfect for reproducing the landscape of the engine districts when steam locomotives were the flower of railways. A prototype that has a relatively shallow pit called a lower road type, with smooth side-to-side rotation and a reliable stop mechanism, this item doubles the fun of running a steam locomotive train. Of course, steam locomotives that have been active in Japan are equipped with a 160 mm main girder that can be mounted with room. Why don't you try to reproduce the scenery of the county area with a wealth of items, such as an extension track set that forms the perimeter of the turntable, adjacent tracks, and an electric turntable extension cord (150 cm).

Main features

• The turntable which is indispensable to enjoy the steam locomotive is a new appearance from KATO!
• The definitive edition of the steam locomotive structure!
• It has a relatively shallow pit called the lower road type. A specification that reproduces the type and pursues ease of use that supports parlor driving.
• The track arrangement angle of the turntable adopts 10 °. The outer diameter of the body is 217 mm. The turntable girder length is 160 mm and large steamers are OK! ·
• The thickness of the turntable is 12 mm. 5 mm up against the 7 mm upper surface of the Unitrack track. Adjust the height outside the adjacent line.
• By the switch operation of the controller, rotation and stop to the left and right and automatic lock type automatic advance angle that drives accurately are adopted. -Actual turning speed of about 1 minute per lap. Just before stopping, it decelerates further and stops securely. The actual movement brings out the scenery of the institution district.
• The connector type one-touch wiring eliminates the need for complicated electrical wiring. Anyone can easily incorporate it into the layout.
• The feed to the line is from the turntable. The turntable girders can feed by feeding the lines before and after the connection.
• In the case of retaining, it can be turned on / off for each indwelling wire by using the insulation joiner and the adjacent line feeder kit and feeding switch (sold separately).
• By combining multiple sets of optional turntable extension lines, it is possible to reproduce a powerful large-scale engine district with a powerful trunk line.
• Separately sold structures including the engine area facility set are perfect for reproducing an engine area with a turntable.

Product contents:

• Turntable controller
  
• Adapter power supply
  
• Controller connecting cord
  
• Jump code 1 adjacent line (straight line) 4 lines
  
• Outer peripheral line (3 lines) 2 pieces
  
• Car stopper 6 pieces
  
• Uni-Joyner 2 piece
  
• Insulation Joiner (one piece) 6 pieces.