Description 

For an ultra-soft hand feel and secure grip, choose the Horseware® Jumper Reins with Stoppers. These classic reins are made with a combination of smooth calfskin leather on the outside and a grippy, texturized rubber on the inside. Leather stoppers provide extra grip and help with even rein length. Finished with tonal stitching, stainless steel hardware, and billet ends. Includes running martingale stoppers for jumping use.

Care 

Washing instructions

• Before you use a new leather product for the first time, make sure you oil it thoroughly. Oiling tack makes it supple and prevents it from drying out and cracking or breaking during use. After an initial cleaning, follow regular wash instructions.
• Care for your leather regularly with a damp sponge and saddle soap to retain a soft, solid leather. It is essential for leather care and must be used liberally, always before hydrating the leather with a conditioner.
• Use warm water to dampen a sponge. Squeeze any excess water out of the sponge before using it. Wipe down all the pieces of the bridle to remove sweat, dirt and grease. Allow the leather to dry naturally before applying saddle soap. This will help to remove any stubborn dirt or grease left over.
• Pay particular attention to cleaning areas of your bridle that are typically under pressure during riding and exposed to saliva, such as bit straps, bottom back strap, and reins where they come in contact with bit.
• It is recommended that you regularly apply conditioner. Completely dismantle your bridle when applying conditioner and apply with a soft cloth or sponge. Apply the conditioner once you have cleaned your leatherwork with saddle soap.

Storage instructions

• Once clean and dry, reassemble your bridle and loop reins through top back strap for storage.
• A climate-controlled environment is best for tack. Dry heat will make leather brittle, while humidity can cause it to mould and mildew.
• Storing your bridle in a fleece lined bridle bag will help prevent moisture.