Do I need special wiring or connectors to install this?

This pump uses factory electrical connectors — plug directly into your existing harness. No rewiring needed.

Will this pump fit if I'm running aftermarket headlight washers?

The dual outlet feeds both circuits, so it works with factory or aftermarket headlight washers as long as they're plumbed to the existing lines.

What if the pump doesn't spray as expected after installation?

Check your fluid lines for kinks or blockages first — debris in the reservoir is the most common culprit. If lines are clear and the motor runs but no spray occurs, the pump may be air-locked; running it for 10–15 seconds usually clears it.