Will this interfere with the factory bumper cover or valance?

The Goblin profile is designed for direct bolt-on fitment to the existing front-end structure. Before installation, confirm your bumper is in stock condition and measure the factory gap points where the lip mounts. If your bumper has been modified or replaced with an aftermarket unit, verify hole locations align with the OEM reference points.

Should I use adhesive or drill through the carbon fiber to mount it?

This panel is engineered for bolt-through mounting into existing factory fastener locations — no drilling of the carbon fiber itself is required. Use stainless or plated fasteners and apply thread-lock to prevent vibration loosening. Avoid adhesive alone; mechanical fastening ensures panel stability at speed and through load cycles.

What prep and finish should I apply before installing?

Sand the panel lightly with fine-grit paper and wipe clean of dust and oils. A UV-protective clear coat is recommended to preserve the carbon weave and protect against UV degradation and minor road debris. Allow full cure time before handling or installation. Raw carbon without clear coat will yellow and degrade faster.